Home Blog Latest News Buying a Used Topper: Flail or Rotary, and What to Check
Buying a Used Topper: Flail or Rotary, and What to Check

Buying a Used Topper: Flail or Rotary, and What to Check

When you are buying a used topper, first decide between a flail topper and a rotary (blade) topper, then match the working width and gearbox to your tractor. After that, check the rotor or blades, bearings, gearbox, PTO shaft, skids or rollers and the frame for cracks. A sound used topper should spin up smoothly with no knocking, heavy vibration or oil leaks.

Flail topper or rotary topper?

Both types cut grass, rushes, weeds and light scrub, but they work in different ways.

A flail topper has a horizontal rotor fitted with many small hammers or Y-blades. It chops material finely and spreads it evenly, so it suits paddocks, amenity grass, verges and anywhere you want a tidy finish. Flails are less likely to throw stones and debris, and if one flail hits something hard it is cheap and quick to replace.

A rotary topper (sometimes called a slasher) has one or more vertical-shaft blades under a deck, driven by a gearbox. Rotary toppers are simple, usually lighter for their width and good at knocking down rough grazing, thistles and rushes quickly. The finish is coarser, they can throw debris further, and the blades and gearbox take more of a shock when they hit a stone or stump.

Wider batwing and trailed toppers, which fold for road travel, are built for large areas such as estates, airfields and big grazing blocks. They need a bigger tractor and have more hinges, hydraulics and gearboxes to check.

Match the topper to your tractor

Before you look at a machine, check:

  • Linkage category: make sure the headstock suits your tractor’s three-point linkage, or that the hitch suits a trailed model.
  • PTO speed and horsepower: the gearbox must match your tractor’s PTO speed. Ask the seller or the maker’s manual for the recommended horsepower range and compare it honestly with your tractor.
  • Working width: a topper should usually cover your tractor’s wheel track so you do not drive over uncut grass.
  • Hydraulics: offset or sideshift models and folding batwings need spare spool valves. Count what your tractor has.

If you are also looking for a tractor to run it, read our guide to buying a used tractor first.

What to check when buying a used topper

Rotor, flails and blades

On a flail topper, look along the rotor for missing, bent or badly worn flails. Uneven wear or missing flails cause vibration, which damages bearings. Check the rotor tube for dents and that the flail mounting bolts and shackles are tight. On a rotary topper, check blades for chips, cracks and rounded edges, and look at the blade bolts and the blade carrier for wear.

Bearings and vibration

Ask for the topper to be run at working speed. Listen for rumbling, knocking or squealing from the rotor bearings. Heavy vibration through the frame usually means a damaged rotor, missing flails or a bent blade carrier. After running, carefully feel the bearing housings once the machine has stopped; one much hotter than the others is a warning sign.

Gearbox and drive

Check the gearbox for oil leaks around the seals and for a correct oil level. Turn the input shaft by hand with the engine off to feel for excess play or rough spots. On flail toppers, inspect the belts and pulleys for cracks, glazing and alignment. A slipping clutch or shear bolt should be present and in working order, because it protects the driveline.

PTO shaft

Make sure the PTO shaft is the right length, the guards and chains are present and the universal joints do not have play.

Frame, skids and rollers

Look for cracks and welding repairs around the headstock, hinges and deck, especially on folding models. Check skids for wear and that the rear roller spins freely on good bearings.

Hydraulics and folding

On offset, sideshift and batwing toppers, work every ram through its full travel. Look for leaking seals, perished hoses and weeping fittings, and check the transport locks work.

Questions to ask the seller

  • What has it mainly been used on: paddocks, rough grazing, verges or scrub?
  • When were the flails or blades last changed, and were they genuine parts?
  • Have the bearings, belts or gearbox been replaced?
  • Can I see it running on a tractor before I buy?

Where to find used toppers for sale

You can browse used toppers and mowers for sale from dealers and private sellers across the UK and Ireland. Recent listings include a Teagle TBM200 hydraulic shift flail topper, a Spearhead Rolliflail 250 HD, a Browns Leopard 250 offset topper, a McConnell SR15 batwing trailed topper and a Kidd Float-Wing 600 batwing topper. For other grass and field kit see farm equipment and attachments, and find a tractor to match in used tractors.

Cannot see the right one? Set up stock alerts to hear when new toppers are listed, or post a wanted request.

Selling a topper or grass machinery?

Dealers can list their full stock on our unlimited listings plan for £100 + VAT a month, or you can book a single 8-week listing for £150 + VAT. If your business needs a website that shows your stock properly, our dealer websites start from £750 + VAT, with hosting free for the first year and £225 + VAT a year from year two.

Frequently asked questions

Is a flail topper better than a rotary topper?

Neither is better for every job. A flail topper gives a finer, tidier finish and throws less debris, so it suits paddocks and amenity grass. A rotary topper is simpler and quick on rough grazing, rushes and thistles where finish matters less.

What size topper does my tractor need?

Choose a topper that at least covers your tractor’s wheel track and sits within the maker’s recommended horsepower range. Check the linkage category, PTO speed and any spool valves needed for offset or folding models.

What wears out first on a used topper?

Flails or blades, bearings, belts and skids are the usual wear parts. Check them carefully on a viewing and ask when they were last replaced, as worn parts are often the first cost after you buy.

Talk to Plant And Tractor Trader

Looking for a particular topper, or want to get your grass machinery in front of UK and Irish buyers? Message us on WhatsApp on 07470 093663 and we will help you find it or get it listed.

Add comment

© 2026 Plant & Tractor Trader