Buying a Used Hedge Cutter: What to Check Before You Buy
When you are buying a used hedge cutter, start by matching the reach, arm type and power needs to your tractor, then check the arm and pivot pins, hydraulic pump and motor, hoses, flail head, rotor bearings and the mounting frame. A sound used hedge cutter should lift, slew and angle smoothly, the rotor should run up without knocking or heavy vibration, and there should be no oil leaks or cracked welds.
Why buy a used hedge cutter now
Autumn and winter are the main hedge cutting months. In England, hedgerows on or next to agricultural land must not be cut or trimmed from 1 March to 31 August inclusive under the hedgerow management rules, with limited exemptions such as road safety. Most farmers and contractors therefore do their cutting between September and the end of February, and a reliable machine matters most in those months. Similar closed seasons apply in other parts of the UK and in Ireland, so check the current rules where you work.
Match the hedge cutter to your tractor
Before you view a machine, write down your tractor’s details and check:
- Reach: think about the tallest and widest hedges and banks you cut. Longer reach arms need a heavier tractor to stay stable.
- Arm type: standard arms suit general hedge and verge work. Telescopic and parallel arms give extra reach and easier control but have more wear points to inspect.
- Tractor weight and horsepower: ask the seller or check the maker’s manual for the recommended tractor weight and horsepower, and whether ballast or a counterweight is needed.
- Mounting: most hedge cutters fit the three-point linkage with a mounting frame, and many have a rear or side frame that bolts to the tractor. Make sure the frame, check chains or stabilisers suit your tractor.
- Controls: older machines often use cable controls, while newer ones have electric proportional controls in the cab. Ask whether the control unit and loom come with the machine and that they work.
If you also need a tractor to run it, read our guide to buying a used tractor first.
What to check when buying a used hedge cutter
Arm, pins and bushes
Work every arm function through its full range. Look for play at the main pivots, the slew and the head angle, as worn pins and bushes cause sloppy, jerky movement. Check the arm sections closely for cracks, fresh welds or repair plates, especially around the rams and the base of the main arm.
Hydraulic pump, motor and oil
Most hedge cutters have their own PTO-driven pump and oil tank. Ask when the oil and filters were last changed, and look at the oil level and colour. With the rotor running, listen for whining or knocking from the pump and motor, and watch for the rotor slowing badly under load. A hot oil smell or a very hot tank after a short run can point to worn components or a cooler problem.
Hoses, rams and leaks
Check every hose for cracks, chafing and weeping fittings, and look underneath for fresh oil. Inspect the ram rods for pitting or scoring and the seals for leaks. Replacing several hoses is not unusual on an older machine, but it should be reflected in what you pay.
Flail head, rotor and flails
Spin the rotor by hand with the PTO off and the machine made safe. Feel for rough or noisy bearings and check the rotor for bends or damaged lugs. Look at the flails for wear and missing pieces, as a missing flail unbalances the rotor. Check the roller, hood and skids for damage from banks and stones.
PTO shaft, frame and breakaway
Check the PTO shaft for worn joints, a damaged guard and the right length for your tractor. Inspect the mounting frame and linkage pins for cracks or elongated holes. Make sure the breakaway system works, as it protects the arm if the head hits a post or tree.
Questions to ask the seller
- How many seasons has it done, and was it used on farm hedges, roadside verges or contract work?
- When were the flails, bearings and hoses last replaced?
- Has the pump or motor been rebuilt or replaced?
- Does it come with the control unit, loom and any counterweight?
- Can I see it running on a tractor before I buy?
Where to find used hedge cutters for sale
Browse hedge trimmers for sale and the wider farm equipment section, where dealers and private sellers across the UK and Ireland list hedge cutters. Recent listings include a Shelbourne Reynolds HD760T, a 2021 Agrimaster Golden R550W, a McConnell PA51, a Spearhead Excel 550 and a McConnell PA 550. For grass kit see toppers and mowers and our used topper guide, and find a tractor to match in used tractors.
Cannot see the right one? Set up stock alerts to hear when new hedge cutters are listed, or post a wanted request.
Selling a hedge cutter or farm machinery?
Dealers can list their full stock on our unlimited listings plan for £100 + VAT a month, or you can book a single 8-week listing for £150 + VAT. If your business needs a website that shows your stock properly, our dealer websites start from £750 + VAT, with hosting free for the first year and £225 + VAT a year from year two.
Frequently asked questions
What size tractor do I need for a hedge cutter?
It depends on the reach and weight of the machine. Check the maker’s recommended tractor weight and horsepower for that model, and add ballast or a counterweight if advised, as a long arm on a light tractor can be unstable.
When can I cut hedges in England?
Hedgerows on or next to agricultural land in England must not be cut or trimmed from 1 March to 31 August inclusive, apart from limited exemptions such as safety on roads and footpaths. Most hedge cutting is done from September to the end of February.
What wears out first on a used hedge cutter?
Flails, rotor bearings, hoses and the pins and bushes on the arm are the usual wear parts. Check them carefully on a viewing and ask when they were last replaced, as they are often the first cost after you buy.
Talk to Plant And Tractor Trader
Looking for a particular hedge cutter, or want to get your machines in front of UK and Irish buyers? Message us on WhatsApp on 07470 093663 and we will help you find it or get it listed.